Materials

TRUFLEX RUBBERIZED CRACK SEALANT

COLD POUR CONVENIENCE – HOT POUR PERFORMANCE
TruFlex is a highly rubberized crack sealant designed for sealing cracks in asphalt or concrete pavements. TruFlex can also be mixed with sand for filling larger cracks and alligatored areas.

FLEXMASTER

ELASTOMERIC CRACK SEALANT FOR ASPHALT AND CONCRETE PAVEMENTS
Seals cracks up to 1/2″ wide in asphalt or concrete. Remains flexible at low temperatures.

POURABLE CRACK SEALANT

POURABLE CRACK SEALANT
An economical cold pour crack filler rubberized for added flexibility. Recommended for cracks up to 1/2″ wide.

TROWEL GRADE CRACK FILLER

HIGH PERFORMANCE
Fortified with mineral fillers for filling larger cracks up to 1″ wide.

GATORPAVE

THE READY-TO-USE PATCHING MATERIAL FOR CRACKED AND ALLIGATORED PAVEMENT

• No Heat Required – Cold Applied
• Easy To Use, Apply by squeegee or trowel
• Polymer modified for maximum performance

ACRYLIC CRACK FILLER

THE ULTIMATE CRACK REPAIR!
High performance elastomeric acrylic crack filler designed for filling cracks and alligatored areas in pavement

LOOPMASTER

RUBBERIZED LOOP SEALANT
Protective barrier for inductive loops. Fills loops up to 1/2″ wide in asphalt and concrete.

STAR ELASTO BOND

Star ELASTO-BOND HS is a premium quality direct fire material that is extremely successful in driveway and parking lot applications. It is chemically formulated to withstand temperatures up to 450ºF without experiencing degradation.

Outstanding Features:

• High Performance-Polymer and Rubber modified
• Heat Stabilized Formula for direct-fired kettles
• Resistant to pick up and tracking under hot pavement conditions
• Superior flexibility in cold temperatures
• Rapid Melting and Fast Leveling
• Low Penetration characteristics

Star ELASTO-BOND PL

Star ELASTO-BOND is the standard in parking lot crack sealants. It is designed for use in oil-jacketed kettles or direct-fire kettles providing that it is equipped with a mechanical agitator system and temperature controls.

Star ELASTO-BOND XT 10

Star ELASTO-BOND XT 10 is ideal for the contractor who wants a single product to use in both road and parking lot applications. It has a high softening point & great low-temperature flexibility. It meets ASTM D 6690 Type 1. Star ELASTO-BOND XT 10 has a lower penetration can be used in parking lot applications. Star ELASTO-BOND XT 10 does not contain any recycled rubber, it can be used in oil-jacketed & direct-fired kettles with mechanical agitation.

FLEX A FILL

FLEX-A-FILL is a hot-applied polymer modified asphalt product used to fill cracks in asphalt concrete or Portland cement concrete pavements in moderate climates. FLEX-A-FILL is supplied in solid form which when melted and properly applied forms an adhesive and flexible compound that resists cracking in the winter and is highly resistant to tracking or pick-up by vehicle tires at warm summer temperatures. FLEX-A-FILL is used in highway, street, airfield, and parking lot pavements and is applied to pavement cracks using either pressure feed melter applicators or pour pots. FLEX-A-FILL is highly recommended for sealing cracks in asphalt pavement prior to coal tar sealing, slurry, overlay, or chip sealing.

At application temperature, FLEX-A-FILL is a low viscosity, a self-leveling product that easily penetrates narrow cracks. FLEX-A-FILL has a fast melt time and can be melted in jacketed double boiler type melting units, or in small direct bottom-fired melters. Both melter types must have sufficient agitation and temperature indicating devices to assure the material is heated to and maintained within the specified application temperature range of 350° to 400°F (177 to 204°C). VOC = 0 g/l.